Harold Street Residence

Quick Facts

Location: Middle Park VIC

Structural Engineer: BSH Structural Engineers

Bricklayer: Peninsula Bricklaying

Builder: Krongold Constructions

Architect: Jackson Clements Burrows

Photographer: John Gollings

Featured Products: Click Here


Recent developments have maintained a sympathy and coherence with the established streetscape, although some older examples, such as the 1930s cream brick duplex that was previously on this site, were less successful.

The Harold Street residence sits at a minor intersection. Its heritage neighbours on the other corners of the intersection are built to their street boundaries.This was the starting point for the Jackson Clements Burrows’ design team led by Graham Burrows.

“The previous building sat as an island on the site and didn’t deal with the corner condition in the same way as the remaining three properties,” says the project’s designer Simon Topliss. Placing the house on the long, south-facing boundary of the 13 by 37 metre block completed the intersection. It also allowed for the development of a substantial garden to the north.“Siting the house between the street and the garden allowed us to explore the public/private relationships between house and the street, and between living areas and the garden.”

Like many other heritage properties in Middle Park, the three established houses on the intersection are red brick.This was a natural choice for the new house, creating a robust street edge and relating to the context.“The north side was more about creating a sensitive and sculpted interface for the garden,”Topliss adds.

The accommodation comprises four bedrooms over two levels as well as a rumpus room, studies and a substantial gallery-style ground floor living area with soaring, timber-lined ceilings.There is onsite parking for four cars via a double stacker.

In many ways this house is about light.The living area, with its impressive art collection, opens out to the garden via folding glass doors. Lighting, mostly LED fixtures and long-life fluorescents, is used sensitively throughout the home. But it is the wall on the southern boundary that is the most striking example of the creative use of light.

This wall is substantially perforated to allow the house to exude an ethereal glow after dark. It is also partly clad with an industrialtype grating finished in black, but large areas of the brickwork are perforated along this southern face, continuing briefly around the back of the building to enclose a deck.

This technique is best known as hit-and-miss brickwork, but care is needed to ensure structural integrity.“The hit-and-miss design began with the idea of using a Flemish bond pattern with the perpends taken out,”Topliss explains. (Flemish brick bonds alternate a brick face with a header.) “On site we played around with the setout and the openings of the miss and ended up going with a third-third-third relationship between the open sections of the brickwork.The proportions and rhythm just felt right.”

This is a fairly uncomplicated hit-and-miss configuration. Larger and more complex openings are possible but they may require specialised engineering design and reinforcement.

However the real design smarts are behind the perforations.The brickwork was finished to the roofline and tied back at 600 mm vertical intervals to mild steel posts. Double-cavity polycarbonate sheets were then carefully lowered into position between posts and brickwork,“essentially sleeved in like a letter into an envelope”.Translucent glass panels were then fixed on the inner face of the assembly. Quite ingenious!

The building’s thermal mass combined with double glazing, high-performance insulation materials, energy-efficient light fittings, grey water recycling, a 40,000 litre water tank (below ground), and a drought-tolerant garden to ensure a five star energy rating.

The designers recognised that there are many variations of red bricks.“We worked with Austral to find the right pressed red, literally going out to their yard and standing by pallets.”They were looking for a face colour that was not too even but conversely didn’t have large colour variation.“We wanted a true red that had a little character in it,” says Topliss.“The bricky, Chris Hill at Peninsula Bricklaying, was instructed to turn burn marks around on a number of bricks so they would be exposed.The perpend is slightly darker as well which helps, giving a little more texture to the wall.”

Capping the building is a magnificent timber-framed roof clad in standing seam zinc, the complexity of which deserves an article of its own.

The owners are thrilled with their new home and its striking design – described by one commentator as “edgy and clever and beautifully modern to look at” – has been recognised first with a Design Award from the City of Port Phillip and more recently a Victorian Architecture Award for new residential architecture.

“The Harold Street residence is located in a heritage overlay area of Middle Park.The design response had to be sensitive to that condition,” Simon Topliss concludes. “But in saying that, there was an overall desire to create a contemporary home. It’s a sculpturally engaging design that deals with the heritage context with delicate architectural detailing and discerning choice of materials.”

Featured Products


The traditional, rich, earthy red of this pressed brick has made it a Melbourne icon. These solid, timeless bricks display an individual character will maintain their appeal and durability for generations to come.

Colour: Pressed Red

More on this Product

Related Content

View more